A frequent and critical problem in older vehicles is burning oil that causes exhaust smoke and increased emissions. Excessive smoke indicates that oil is getting past the valves and piston rings and into the combustion chamber. Also, over time seals will become dry, brittle and shrink causing oil leaks that can harm the engine or may cause engine failure.
BARDAHL ALL-U-NEED!® NoSmoke®+Stop Leak™ is a “double-action” synthetic formula that treats both problems. First, a chemical solution reduces oil burning and decreases exhaust smoke by “filling-in” the loose tolerances between the moving parts inside an engine. The extra thick formula seals any spaces between the valves and guides, piston rings and cylinder walls. Second, a seal swell agent restores pliability of the seals, which stops any oil leaks. In addition, this ALL-U-NEED!® solution reduces friction, cushions worn bearings, quiets noisy lifters, improves compression and maintains efficient lubrication to improve the operation of the vehicle.
Use at each oil change. Run the engine at idle for 5 minutes to warm the engine. Remove the oil filler cap and pour one bottle of NoSmoke® +Stop Leak™ into the crankcase. Do not overfill. Only add this product to an engine that is running at its normal operating temperature. If smoking occurs between oil changes, maintain the engine by adding a sufficient amount to control smoke emissions. Dispose of any used or unused solution in accordance with the local, state and federal regulations.
P.O. Box 70607 Seattle, Washington 98127
1400 N.W. 52nd Street, Seattle, Washington 98107
Phone: (888) 227-3245
Fax: (206) 784-3219
Customer Service: (888) 227-3245