Vehicle cooling systems work by transferring heat from the engine to the radiator. Over time deposits will build-up and rust, scale and sludge will form an insulating barrier that reduces the efficiency of the cooling system. This can cause over-heating and serious damage to the engine.
BARDAHL Radiator Super Flush is a very effective cleaner that removes damaging deposits of rust, scale and sludge; restoring the efficiency and performance of the cooling system. The formulation includes wetting and surface active agents that thoroughly clean and protect the radiator.
Remove the radiator cap only if the engine is cool. Run the engine until it gets hot. Thoroughly shake the bottle and while the engine is in a fast idle, pour the entire contents into the radiator. Replace the radiator cap and let the engine idle normally for 10 minutes. Drain the system by opening the radiator petcock or carefully removing lower radiator hose. Flush the system with clear water. Neutralization is not required. Close all drains and refill the radiator with coolant or a water / anti-freeze mixture. Dispose of any used or unused solution in accordance with the local, state and federal regulations.
P.O. Box 70607 Seattle, Washington 98127
1400 N.W. 52nd Street, Seattle, Washington 98107
Phone: (888) 227-3245
Fax: (206) 784-3219
Customer Service: (888) 227-3245